Cone Art Square 2322

200 Litre Square Top loading electric Pottery kiln.

Why have a round kiln when a square kiln could take up less space?

This kiln chamber has been cleverly designed for use with square shelves. Supplied with 21 inch wide square kiln shelves, which will allow you to load in the same way as a traditional 'front loading' kiln chamber, yet with a 'birds eye view' making loading easier, and with the cost benefit of buying a top loader over a front loading kiln.

The chamber size is 23″ wide (58cm) x 22.5″ deep (57cm).  Easy to load, the top rim of the kiln chamber being only 85cm from the floor, you'll not need to stand on tip toes to get to the bottom!

This top loader comes with all the standard features that set the "Cone Art" brand apart: heavy duty floor element, double wall design, patented lid lifter system, multi zone control, and over sized swing out control panel. This kiln can fire up to cone 10 and gives you a considerable 200 litres of firing capacity.  To give you an idea of relative capacity, this is enough to fire 96 average sized mugs!

Not all pots are round…..and all kilns shouldn’t be either.

•     200 litres
•     Double wall insulated construction
•     High Specification Kanthal A-1 heating Elements
•     Sectional design
•     Multiple zone Bartlett controller
•     Lid safety electric cut-out as standard
•     Counterweight lid lifter
•     Kiln shelves and props
•     2 year limited warranty

This is a double insulated kiln with a wall profile of 2.5” premium firebrick plus 1″ of block insulation. 

The floor and lid are constructed with 3″ firebrick and has an additional 1″ of block insulation.  The extra insulation ensures a cooler, safer jacket, longer element life, and approximately 30 % savings in electricity costs. The kiln is clad in a stainless-steel jacket for extra protection and durability.

There are heavy-duty Kanthal A-1 elements in the walls and floor. This makes firing to cone 10 possible.

This kiln is equipped with a counterweight lid lifter and advanced Wifi-enabled Genesis touch screen 'Bartlett' controller with multiple zone control panel mounted on an angle for easy viewing.

Included with this kiln is a full Official Furniture kit which contains the following:

• 3 x Square 21 inch shelves 3/4 inch thick
• 2 x Rectangular 21 inch x 10.5 inch shelves 3/4 inch thick
• 4 x 1 inch posts
• 3 x 2 inch posts
• 6 x 4 inch posts
• 3 x 6 inch posts
• 3 x 8 inch posts
• 2 kilos of Kilnwash