Studio 2 Top or Bottom Element (without brass connectors)

 A single replacement top or bottom heating element for Hobby Ceramicraft Studio Two kiln.  Made in the UK.

 

Two TB elements are required for this kiln, one for the Top, one for the Borttom.

 

18ohms.

 

A handy tip when you get your new UK made element is to first remove the old element from the kiln, then lay alongside the new element to compare the length.  Often you will need to stretch the new element to make the same length.  A new element will easily stretch by gently tugging the coils apart at various points along the element.  A used or already fired element will have become brittle and will not take kindly to be stretched!

 

The UK made elements are supplied without new brass connectors