Rotary tool - Slim cone (D12) 170 Grit
Z-DCT132
£15.00Stock Available:
2
Get a D11 or D12 Slim Cone Rotary Tool from DiamondCore® Tools today!
DESCRIPTION:
- Solid Diamond Grinding rotary tool burrs made of solid diamond grit and metal down to the shaft
- 4 mm x 15mm length CONE shape
- D11 80 grit, coarse for grinding
- D12 170 grit, fine for autographing or personalizing
USES:
- Grinding glaze drips, bisque, or high-fired ceramic
- Also works on tile, stone, or glass
- Removing sharp edges
- Shaping or cleanup of bisque spots
- Removing kiln shelf debris
BENEFITS:
- A rapid removal of unwanted material
- Long lifespan if used properly
- Dust is controlled with water use
- Shaft size: 3 mm dia. (1/8")
- As the tool wears, a new layer of diamonds is exposed
CAUTIONS:
- Use all safety precautions
- Always use safety goggles
- Be certain to clean and remove all debris from splash pans
- Use a cordless rotary tool to avoid water getting in the motor
- Always use with water to extend tool life and control dust
- Do not attempt to force or pry with this tool
- Keep out of the reach of children
Note: For longevity, use water, high speed, and gentle pressure. Overheating the tool will greatly decrease tool lifespan and change the tool shape.