Koala XL Handheld Clay Extruder

Craft charming clay handles effortlessly with DiamondCore® Tools' R207 Koala XL Handheld Clay Extruder. Its angled stainless-steel blade delivers clean results, shaping a koala-like head with two smaller ear humps on either side, inspired by our R12 extruder design.

DESCRIPTION: 

• Slices through a slab to make a shape with one large center hump and two smaller pointed humps on each side
• Angled, stainless-steel blade leaves clean edges and pulls through clay effortlessly
• 4 3/8-inch (11 cm)-long hardwood handle
• Great for feet, handles, and more 
• Adjustable-depth ski controls the thickness of the cut
• Thumb screw allows for easy ski adjustment
• Max approx. blade width 30 mm X height 16 mm
• Min approx. blade width 28 mm X height 12 mm
• Wood grain may vary

USES/BENEFITS:

• Ideal for hand-builders and useful for throwers
• Consistent shape and adjustable thickness
• So easy to use; avoid all that pulling
• Works on a variety of clay types
• Always-sharp stainless-steel blade won’t rust or shatter
• A variety of basic and intricate shapes are available

CAUTIONS:

• Not designed to be used with extremely wet or sticky clay
• Use all safety precautions
• Keep out of the reach of children 

TIP:

For best results, use these foot and handle-making tools when the clay is not extremely wet or sticky. The clay tool blade should be clean and dry. Ideally, pull the extrusion up and out as it is being formed or fold back the sides of the slab so the extrusion pops up and out.