Creamware Mug

Begin with properly fired shelf cone 04 bisque.  Moisten a clean sponge and wipe bisque to remove any dust.

Load slip trailer with SW-126 Polished Pebbles. Slip trail thick vertical lines on the banded ridges approximately 1/8 inch apart.

Using a CB-604 #4 Soft Fan, apply 3 coats of SW-126 Polished Pebbles to the inside of the mug.

Slightly thin SC-86 Old Lace with water, and apply 3 even coats to the exterior of the mug.

Once SC-86 Old Lace is completely dry, apply 1 coat SW-126 Polished Pebbles to the exterior of the mug.

With a damp sponge wipe off any excess glaze off the foot of the mug.

Do not stilt and fire to shelf cone 5/6.