Double Round XS handheld Clay extruder
Z-R103![](../images/uploaded/diamondcore_double_round_xs_handheld_clay_extruder.jpg)
![](https://www.hobbyceramicraft.co.uk/images/uploaded/diamondcore_double_round_xs_handheld_clay_extruder2.jpg)
The R103 Double Round XS Handheld Clay Extruder has an angled, stainless-steel blade that leaves clean edges and pulls through clay effortlessly to create a smaller handle shape with a double-rounded design.
This extra-small extruder re-creates our R9 extruder shape.
DESCRIPTION
Slices through a slab to make a double-rounded shape
Angled, stainless-steel blade leaves clean edges and pulls through clay effortlessly
4 3/8-inch (11 cm)-long hardwood handle
Great for feet, handles, and more
Adjustable-depth ski controls the thickness of the cut
Thumb screw allows for easy ski adjustment
Max approx. blade width 16 mm X height 17 mm
Min approx. blade width 15 mm X height 7 mm
Wood grain may vary
USES/BENEFITS
Ideal for hand-builders and useful for throwers
Consistent shape and adjustable thickness
So easy to use; avoid all that pulling
Works on a variety of clay types
Always-sharp stainless-steel blade won’t rust or shatter
A variety of basic and intricate shapes are available
CAUTIONS
Not designed to be used with extremely wet or sticky clay
Use all safety precautions
Keep out of the reach of children
TIP
For best results, use these foot and handle-making tools when the clay is not extremely wet or sticky. The clay tool blade should be clean and dry. Ideally, pull the extrusion up and out as it is being formed or fold back the sides of the slab so the extrusion pops up and out.