Element Rhino

 

 

Instructions

1. Moisten a clean sponge and wipe bisque to remove any dust making sure not to over saturate the bisque.
2. Brush the rhino with two coats of EL-125 Sahara Sands, brushing in different directions with a Soft Fan brush.
3. Allow to dry.
4. Roll SG-401 Black over the ST-127 Crackle stamp with foam roller making sure not to overload the applicator. Too much colour will result in a blurred messy image. Turn the stamp over onto the desired area and press down on the stamp so that the stamp is making contact with the area you want stamped. Make sure not to rub back and forth or this will cause a double image.  Stamp the rhino leaving some of the small faceted shapes plain. Allow to dry
5. Outline all the faceted shapes with SG-401 Black.
6. Fire to self cone 06.

Graphic Rhino

Products Used

Bisque

• MB-1430 Faceted Rhino

Colour

• SG-401 Black, SC-97 Cant-elope, Clear Dipping Glaze or  Clear Brushing Glaze

Decorating Accessories

• CB-106 #6 Script Liner, Soft Fan

Miscellaneous Accessories

• BT-910 Synthetic Sponge

 

 

Instructions

1. Moisten a clean sponge and wipe bisque to remove any dust.
2. Use the CB-106 #6 Script Liner to apply 2-3 coats of SC-97 Cant-elope to some of the faceted shapes.
3. Use SG-401 Black to outline all the faceted edges on the rhino.
4. Use SG-401 Black to make graphic designs on some of the faceted shapes, leaving some plain.
5. Let Dry. Dip into Clear glaze or use the Soft Fan to apply 2 coats of Clear Brushing Glaze.
6. Stilt and fire to cone 06.