Bat Dog

 

Bisque

• MB-1507 Stretch Dog Container

Colour

• SC-5 Tiger Tail
• SC-15 Tuxedo
• SC-24 Dandelion
• SC-34 Down To Earth
• SC-54 Vanilla Dip
• FN-009 Black
• S-2101 Clear Dipping or NT-CLR Clear Brushing Glaze

Decorating Accessories

• AC-320 Clay Carbon Paper
• CB-106 #6 Script Liner
• CB-110 #10/0 Liner
• CB-604 #4 Soft Fan

Miscellaneous Accessories

•  Pattern: Download

 

Instructions

1. Begin with properly fired shelf cone 04 Bisque.
2. Moisten a clean sponge and wipe bisque to remove dust. Slightly thin FN-009 Black.
3. Pour into the container, roll to coat then pour out the excess glaze. Use a sponge to wipe away drips on the outside of the dog. Download the pattern. Pencil a section of the dog's body for the cape. Trace the bat pattern onto the middle of the cape using Clay Carbon paper and a pencil. Pencil in the mask on the dog's face.
4. Use the Soft Fan to apply three coats of slightly thinned SC-5 Tiger Tail over the remainder of the body. Add SC-24 Dandelion to the brush to highlight.
5. Paint over the edges of the penciled lines - Tuxedo will cover the glaze. Use the Script Liner with SC-34 Down to Earth to shade around the ears and cape.
6. Use the Script Liner to apply two coats of SC-24 Dandelion onto the yellow area of the bat pattern.
7. Use the Script Liner to apply two coats of SC-15 Tuxedo over the black areas, mask, bat, cape and dog's nose.
8. Use the Liner to apply two coats of SC-5 Tiger Tail to the irises of the eyes and SC-15 Tuxedo to the pupils. Outline the eye areas with SC-15 Tuxedo.
9. Use the Soft Fan to apply one coat of S-2101 Clear or dip into NT-CLR Clear Dipping Glaze.
10. Fire to cone 05/06